Shop

DigiX Bravo Repeater

Our DigiX Bravo is a fast trasmitting repeater which can be used for both DMR and PoC radios with CDCSS grouping at the same frequency.

Tier-2 DMR standard of ETSI TS102-361

TIA/EIA-603C and MIL-STD-810 standard

Fast transmitting for analogue signalling and sub-tone signalling, supports CDCSS grouping at same frequency

Base station mode and dispatcher mode available

Communication between radios and cable telephone(PABX/PSTN)and mobile phone

IP Network

4G/DMR talk thought module

1/5/25 output power

Unaffected sensitivity even under transmitting mode with full power

Auto–configuration, self-diagnostic, remote monitor and Network management (Monitor system software need)

Via Ethernet network, support IP soft switch and multiple sites networking

Support normal analogue signalling, MDC1200 Signaling could be extended

General
Frequency Range	136~174mhz/400-470Mhz/470~512Mhz
Channel Spacing	Digital：12.5/6.25 KHz; Analog:12.5/25.0KHz
Working Voltage	100~264VAC~50/60kHz
Working Temperature	-10℃-+55℃
Weight	15kg
Dimensions:HWD(mm)	48244089mm
Transmitter
Frequency stability	≤2.5ppm
Transmitting Power	1/5/25W
Adjacent Channel Power	±12.5kHz: ≤-60dB,±25kHz:≤-70dB
Transient Switchover Adjacent Channel Power	±12.5kHz: ≤-50dB,±25kHz:≤-60dB
Digital Modulation	4FSK
4FSK Digital Modulation	Date 7K60FXD, Date Plus Voice 7K60FXW
Digital Speech Encoder	AMBE++
Digital transmit error rate	≤1.5%
Receiver
Digital Sensitivity (BER5%)	≤-117dBm
Adjacent Channel Selectivity	≥65dB
Intermediation Disturbance Rejection	≥70dB
Intermediation Disturbance Rejection	≥90dB
Receive Spurious radiation	-57dBm@<1GHz,-47dBm@＞1GHz
Rated audio Power	3.0W